I did however discover new software (packages) in OpenSuSE 11.1 I have not known before. These packages are Tasque, Tellico, Twinkle, Monsoon, PulseAudio and Derby. I googled these terms and came up with the following.

• Tasque is a simple task management app (TODO list) for the Linux Desktop. The screenshots remind me of the todo app that comes with the KDE Kontact tool.
• Tellico is a KDE application for organizing your collections. Tellico allows you to enter your collection in a catalogue database.
• Twinkle is a free software/open source VoIP softphone application for Linux. It uses the SIP protocol. It also incorporates a GPL implementation of the ZRTP and SRTP security protocols and MD5 digest authentication.
• Monsoon is a fully featured bittorrent GUI supporting many advanced features such as selective downloading, automatic port forwarding via uPnP and RSS integration.
• PulseAudio is a sound server for POSIX and Win32 systems.
• Apache Derby is an open source relational database implemented entirely in Java.

I’d like to say even before I tried it out openSUSE just got better!

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

New software packages bundled with OpenSuSE 11.1

Today I had to run updates on a new laptop which is given away in my family this year as xmas present. Needless to say I decided to install some software. The presentee is still at a very influential age. I should have installed Ubuntu or OpenSuSE but I ran with Windows to not upset the father. For all the applications though I was luckily enough to find open source software.

I installed OpenOffice for office stuff, Scribus for desktop publishing, Mozilla Firefox for surfing, Thunderbird for mails, Songbird for music, Miro and VLC for videos, The Gimp for pictures and painting and last but not least Inkscape for (vector) graphics.

The presentee will get a pretty powerful software package with no upfront cost and no hidden fees. As she is not settled with any programs this setup will open the whole world of open source software to her.

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

The open source application stack for Windows

I was thinking of deploying jabber services for podcast.de for a while now but couldn’t decide which server to take. I checked the ejabberd website. The software looks promising. So I give it a try.

smart install ejabberd

Could not find any results. So I check OpenSuSE software search. Luckily it lists a source which I add to my smart sources.

smart channel --edit

[Cyberorg]
type = rpm-md
name = Cyberorg
baseurl = http://download.opensuse.org/repositories/home:/cyberorg:/sugar/openSUSE_11.0/

On to install the ejabberd package:

smart install ejabberd

I get a report that I am still missing a package for erlang as ejabberd is written in erlang. I use the OpenSuSE software search again which lists the following source:

[NicoK]
type = rpm-md
name = NicoK
baseurl = http://download.opensuse.org/repositories/home:/NicoK/openSUSE_11.0/

Now I can install ejabberd: ejabberd-2.0.0-2.11@x86_64
I also need one more package: erlang-R12B4-18.11@x86_64

The beauty of installing pre-compiled RPMs on OpenSuSE. You almost always get a rc-file along with the RPM (for server software that is).

rce -> Tab -> rcejabberd

There it is. Great! Now I want to change the default configuration. I would expect a config file to sit in /etc/sysconfig but ejabberd brings its own directory under /etc/ejabberd where two config files reside: ejabberd.cfg and ejabberdctl.cfg.

I read before that ejabberd.cfg is the heart of ejabberd. So I edit this for local usage only ATM.

{hosts, [{ip, {127, 0, 0, 1}}]}.

I give it a try:

rcejabberd start
Starting ejabberd    done

Looks like it started. Too bad checking http://127.0.0.1:5280/admin does not work. I check for an error in the log dir /var/log/ejabberd/ just to find out no files have been created. ps aux shows me some erlang stuff is running: /usr/lib64/erlang/erts-5.6.4/bin/epmd -daemon but no jabber process(es) which I would suspect.

I am increasing the loglevel to debug (5):

{loglevel, 5}.

No change. I remove -detached in the run script and try again. This time I get debug messages on the shell:

rcejabberd start
Starting ejabberd Erlang (BEAM) emulator version 5.6.4 [source] [64-bit] [smp:2] [async-threads:0] [hipe] [kernel-poll:false]
{"init terminating in do_boot",{undef,[{ejabberd,start,[]},{init,start_it,1},{init,start_em,1}]}}
Crash dump was written to: erl_crash.dump init terminating in do_boot()    failed

At this point I have to give up the experiment as I have no time to fiddle around with erlang problems.

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

ejabberd on GNU/Linux OpenSuSE 11.0

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

Free e-book shellprogramming

I was never really satisfied with the speed of our system under load. I tried and tried. I optimized a lot of stuff in the backend and with the database. Most of the time I found a switch to make the system just a bit faster. Read Retrospective on three years of Seagull development if you are interested in the whole story.

In the last couple of weeks I ran out of ideas on where to improve next (without the need of rewriting too much code). I remembered using Squid years ago. I had a look at the newest version (3.0) and my interest in Squid stopped pretty soon after reading through the documentation. It was just not the software I needed.

I dived into spreading the load to multiple backends using HAproxy which by the way has a super active community. Check the mailinglist. The maintainer Willy is doing a great job. Learning about HAproxy I stumbled across the webserver nginx (pronounced engine x) numerous times. Learning about nginx I stumbled across the reverse proxy Varnish which is the proxy solution I hoped Squid would be. Furtherdown the line I ran into PHP-FPM – the PHP FastCGI Process Manager – which should not stay unmentioned.

So I read lots of blog posts, mails from mailinglists, documentation, articles, visited several forums and also learned many new things in a few wikis. So after getting the idea I had my stack together: Varnish -> HAproxy -> nginx -> PHP -> MySQL

Time to test it out! Varnish comes in a relatively uptodate package for my favorite distribution OpenSuSE (currently running 10.3 on 6 systems). HAproxy is available in a fresh version. nginx is theoretically available. It cannot install it though because of a package management conflict. So I downloaded the source for the newest stable version (0.6.3 as time of writing) and compiled it.

wget http://sysoev.ru/nginx/nginx-0.6.32.tar.gz
./configure --prefix=/opt/software/nginx-0.6.32 --user=nginx --group=nginx --without-mail_pop3_module --without-mail_imap_module --without-mail_smtp_module
make && make install

I did not need to install any extra packages. Frankly spoken I do have all the packages for compilation of C/C++ installed.

cd /opt/software
ln -s /opt/software/nginx-0.6.32 nginx

I always set a symlink to the currently used package. That way it is easy to replace the package when new versions come out. I can compile and install the new version and just switch the symlink.

Next thing I had to compile was a patched PHP version. So download the sources at php.net and the patches at the PHP-FPM site.

Unpack the PHP source:

tar xjvf php-5.2.6.tar.bz2

Patch the source:

gzip -cd php-5.2.6-fpm-0.5.8.diff.gz | patch -d php-5.2.6 -p1

Configure PHP (adjust your settings accordingly):

LDFLAGS="-L/usr/lib64" ./configure --with-curl --disable-debug --enable-libxml --enable-session --with-pcre-regex --enable-xml --with-bz2 --with-zlib --enable-exif --enable-inline-optimization --enable-soap --enable-sockets --with-xmlrpc --without-pear --with-libdir=lib64 --with-mysql --with-mysqli --enable-mbstring --with-mcrypt --with-mhash --with-mime-magic --with-jpeg-dir=/usr/lib64 --with-png-dir=/usr/lib64 --with-gd --enable-gd-native-ttf --with-ttf --with-freetype-dir --enable-ftp --enable-zend-multibyte --with-openssl --enable-force-cgi-redirect --with-pcre-regex --without-sqlite --without-mm --enable-fastcgi --enable-bcmath --enable-fpm --quiet --prefix=/opt/software/php5.2.6-fpm

Compile and install:

make & make install

Adjust the PHP-FPM settings to fit your needs. You can find more info on this and related subjects in the PHP-FPM documentation.

vim /opt/software/php/etc/php-fpm.conf

Start PHP-FPM:

/opt/software/php/bin/php-cgi --fpm

Have a look in the log files:

/opt/software/php/logs/php-fpm.log

Now you can connect through your webserver to fast-cgi processes. I use nginx as webserver (see above). Advantages and disadvantes of fast-cgi vs. mod-based approaches et al have been covered elsewhere. For me this makes perfectly sense and works extremly well.

After playing around with Varnish for a while I decided I do not need HAProxy ATM. Varnish can do all the decisions I need to make based on HTTP headers. I configured Varnish’s config file (here: vcl.conf) by reading lots of examples on the net and trial and error.

If I find more time and anyone is interested I post more details on the configuration of nginx and Varnish. But for now I want to publish this post as it has been sitting here for a while already.

PS: If people say content is king they are absolutely right. But never forget in the internet speed is Kaiser!

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

Apache and lighttpd replaced by nginx for PHP application

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

OpenOffice 2.3 not working on 64-bit cpu

So I installed Xvidcap

yum -y install xvidcap.x86_64

You can record actions in a little window. Not as fancy as Camtasia but will do for the beginning.

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

Open Source alternative for Camtasia under Linux