# last

Calling last on your commandline gives you a list of logins. You will see who is still logged in and who was logged in before from what adress.

You can shorten the list of results with last -n XX. XX being the number of results you want to have displayed, e.g. last -n 5 for 5 lines.

# last reboot

Calling last reboot lists the reboots since the log file which tracks all logins was created.

The manual page for last – man last – will show you more parameters.

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

Useful shell commands: last

You can get up-to-date packages of nginx through OpenSuSE’s build service. I have not yet found a RPM package of php-fpm though. Therefore I compile it myself. This works well and I have the advantage that I can customize by PHP package.

But there is also one disadvantage. There is no system runlevel script available this way. So you cannot make use of the rc stuff on OpenSuSE and start PHP at boot time. As I have quiet a few machines to administer I decided to write my own runlevel script to start php-fpm.

Looking closer into the stuff that is already delivered with the php-fpm package is a powerful start script. I took it as the basis of my script. I had to modify it only in a few places. Big thanks to the author(s)!

It will take a few easy steps to get php-fpm running after booting.

1. Download my modified php-fpm script to your server’s runlevel directory (/etc/rc.d).
2. Rename the file by removing the file extension (.txt)
3. Give your superuser (root) rights to execute it.
4. Open the file php-fpm in your favorite editor (Vim, emacs, joe, …).
5. Modify the three lines (php_fpm_BIN=, php_fpm_CONF=, php_fpm_PID=) on top to match your installation directory of php-fpm.
6. Save and close the file.
7. Start yast with yast runlevel and switch to expert mode with Alt+x
8. Activate php-fpm for runlevels 3 and 5 (or whatever suits you). Save your changes with Alt+o. That’s it!

Now your php-fpm installation starts on boot. If you ever have to reboot your machine you do not have to think about starting php-fpm manually as the system does it for you.

Let me know if this was helpful for you, if it works and if you have any questions!

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

php-fpm runlevel start script for OpenSuSE 11.1

zypper refresh
zypper dist-upgrade

I did excatly that. It did refresh a few packages but as I guessed immediately not enough. I tried over. It did not help. Here is the solution. Delete all subdirectories in /var/cache/zypper and execute the commands above again.

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

System upgrade openSUSE 11.0 to openSUSE 11.1 with zypper

I did however discover new software (packages) in OpenSuSE 11.1 I have not known before. These packages are Tasque, Tellico, Twinkle, Monsoon, PulseAudio and Derby. I googled these terms and came up with the following.

• Tasque is a simple task management app (TODO list) for the Linux Desktop. The screenshots remind me of the todo app that comes with the KDE Kontact tool.
• Tellico is a KDE application for organizing your collections. Tellico allows you to enter your collection in a catalogue database.
• Twinkle is a free software/open source VoIP softphone application for Linux. It uses the SIP protocol. It also incorporates a GPL implementation of the ZRTP and SRTP security protocols and MD5 digest authentication.
• Monsoon is a fully featured bittorrent GUI supporting many advanced features such as selective downloading, automatic port forwarding via uPnP and RSS integration.
• PulseAudio is a sound server for POSIX and Win32 systems.
• Apache Derby is an open source relational database implemented entirely in Java.

I’d like to say even before I tried it out openSUSE just got better!

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

New software packages bundled with OpenSuSE 11.1

Today I had to run updates on a new laptop which is given away in my family this year as xmas present. Needless to say I decided to install some software. The presentee is still at a very influential age. I should have installed Ubuntu or OpenSuSE but I ran with Windows to not upset the father. For all the applications though I was luckily enough to find open source software.

I installed OpenOffice for office stuff, Scribus for desktop publishing, Mozilla Firefox for surfing, Thunderbird for mails, Songbird for music, Miro and VLC for videos, The Gimp for pictures and painting and last but not least Inkscape for (vector) graphics.

The presentee will get a pretty powerful software package with no upfront cost and no hidden fees. As she is not settled with any programs this setup will open the whole world of open source software to her.

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

The open source application stack for Windows

I was never really satisfied with the speed of our system under load. I tried and tried. I optimized a lot of stuff in the backend and with the database. Most of the time I found a switch to make the system just a bit faster. Read Retrospective on three years of Seagull development if you are interested in the whole story.

In the last couple of weeks I ran out of ideas on where to improve next (without the need of rewriting too much code). I remembered using Squid years ago. I had a look at the newest version (3.0) and my interest in Squid stopped pretty soon after reading through the documentation. It was just not the software I needed.

I dived into spreading the load to multiple backends using HAproxy which by the way has a super active community. Check the mailinglist. The maintainer Willy is doing a great job. Learning about HAproxy I stumbled across the webserver nginx (pronounced engine x) numerous times. Learning about nginx I stumbled across the reverse proxy Varnish which is the proxy solution I hoped Squid would be. Furtherdown the line I ran into PHP-FPM – the PHP FastCGI Process Manager – which should not stay unmentioned.

So I read lots of blog posts, mails from mailinglists, documentation, articles, visited several forums and also learned many new things in a few wikis. So after getting the idea I had my stack together: Varnish -> HAproxy -> nginx -> PHP -> MySQL

Time to test it out! Varnish comes in a relatively uptodate package for my favorite distribution OpenSuSE (currently running 10.3 on 6 systems). HAproxy is available in a fresh version. nginx is theoretically available. It cannot install it though because of a package management conflict. So I downloaded the source for the newest stable version (0.6.3 as time of writing) and compiled it.

wget http://sysoev.ru/nginx/nginx-0.6.32.tar.gz
./configure --prefix=/opt/software/nginx-0.6.32 --user=nginx --group=nginx --without-mail_pop3_module --without-mail_imap_module --without-mail_smtp_module
make && make install

I did not need to install any extra packages. Frankly spoken I do have all the packages for compilation of C/C++ installed.

cd /opt/software
ln -s /opt/software/nginx-0.6.32 nginx

I always set a symlink to the currently used package. That way it is easy to replace the package when new versions come out. I can compile and install the new version and just switch the symlink.

Next thing I had to compile was a patched PHP version. So download the sources at php.net and the patches at the PHP-FPM site.

Unpack the PHP source:

tar xjvf php-5.2.6.tar.bz2

Patch the source:

gzip -cd php-5.2.6-fpm-0.5.8.diff.gz | patch -d php-5.2.6 -p1

Configure PHP (adjust your settings accordingly):

LDFLAGS="-L/usr/lib64" ./configure --with-curl --disable-debug --enable-libxml --enable-session --with-pcre-regex --enable-xml --with-bz2 --with-zlib --enable-exif --enable-inline-optimization --enable-soap --enable-sockets --with-xmlrpc --without-pear --with-libdir=lib64 --with-mysql --with-mysqli --enable-mbstring --with-mcrypt --with-mhash --with-mime-magic --with-jpeg-dir=/usr/lib64 --with-png-dir=/usr/lib64 --with-gd --enable-gd-native-ttf --with-ttf --with-freetype-dir --enable-ftp --enable-zend-multibyte --with-openssl --enable-force-cgi-redirect --with-pcre-regex --without-sqlite --without-mm --enable-fastcgi --enable-bcmath --enable-fpm --quiet --prefix=/opt/software/php5.2.6-fpm

Compile and install:

make & make install

Adjust the PHP-FPM settings to fit your needs. You can find more info on this and related subjects in the PHP-FPM documentation.

vim /opt/software/php/etc/php-fpm.conf

Start PHP-FPM:

/opt/software/php/bin/php-cgi --fpm

Have a look in the log files:

/opt/software/php/logs/php-fpm.log

Now you can connect through your webserver to fast-cgi processes. I use nginx as webserver (see above). Advantages and disadvantes of fast-cgi vs. mod-based approaches et al have been covered elsewhere. For me this makes perfectly sense and works extremly well.

After playing around with Varnish for a while I decided I do not need HAProxy ATM. Varnish can do all the decisions I need to make based on HTTP headers. I configured Varnish’s config file (here: vcl.conf) by reading lots of examples on the net and trial and error.

If I find more time and anyone is interested I post more details on the configuration of nginx and Varnish. But for now I want to publish this post as it has been sitting here for a while already.

PS: If people say content is king they are absolutely right. But never forget in the internet speed is Kaiser!

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

Apache and lighttpd replaced by nginx for PHP application

Setting up my first lighttpd server was easy. Configure runs through as wanted with just a few options:

LDFLAGS=”-L/usr/lib64″ ./configure –prefix=/usr/local/lighttpd-1.4.18 –with-pcre –with-bzip2 –with-rewrite –with-redirect –with-zlib –disable-ipv6

I took the few configurations options I needed from the official docs. Everything works as aspected and is pretty straight forward. You can check the syntax with the -t switch:

sbin/lighttpd -f lighttpd.config -t

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

Switching from Apache HTTP Server to Lighttpd – Installing Lighttpd

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

OpenOffice 2.3 not working on 64-bit cpu

So I installed Xvidcap

yum -y install xvidcap.x86_64

You can record actions in a little window. Not as fancy as Camtasia but will do for the beginning.

This post originated from the Linux Showroom feed. Please check out Linux Showroom for more posts.

Open Source alternative for Camtasia under Linux